Philips CCB193AT - Manual (Page 28)

28 Playing
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
PLAY/▲ button.
• Playback features and options are
on pages 37-41.
• When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR. Noise lines (black and white
streaks) may appear on the picture.
Helpful Hints
Follow the steps below to play a tape.
1
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab has been removed, playback should start auto-
matically.
2
If playback does not start automatically, press the
PLAY/▲ button to start playback.
3
Press the STOP/▼ button on the remote control or the
STOP/EJECT button on the TV/VCR once to stop play-
back.
4
Press the REW(ind)/{ button to rewind the tape.
5
When the tape has finished rewinding, press the
STOP/EJECT button on the TV/VCR to remove the tape.
1
4
5
2
3
Press the STOP/EJECT button
on the TV/VCR.
Insert a tape in the TV/VCR.
VOL.
CH.
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
TRACKING REC/OTR
SPEED MEMORY
SURF SLOW
PAUSE/STILL
MUTE
F.FWD REW
PLAY
STOP
SLEEP/WAKE UP
MENU CLEAR
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape
recorded in S-VHS format. A tape recorded in S-VHS format
will play the same as a tape recorded in normal format. This
unit detects whether the tape is recorded in S-VHS format or in
normal format.