Miele G 2630 SCi - Manual (Page 54)

Poor cleaning results
Issue Possible fault Solution
The dishes are not
clean. The dishes were not loaded
correctly. See "Loading the
dishwasher".
The program was not
powerful enough. Select a more intensive
program, see "Program
Guide".
Stubborn but normal soiling
(e.g. tee). Use the function "Adjust
Sensor Wash". See
"Settings J - Adjust Sensor
Wash".
Not enough detergent was
dispensed. Use more detergent, see
"Adding detergent".
The spray arms are blocked. Turn the spray arm and
rearrange the dishes if
necessary.
The triple filter is clogged or
not correctly inserted. The
spray arm jets might be
clogged. Clean the filter and insert it
correctly, see "User
Maintenance Instructions".
The drain pump or the
non-return valve is blocked.
Wash water will run back into
the wash cabinet. Clean the drain pump and
the non-return valve, see
maintenance instructions.
Glasses and
cutlery show
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off. The rinse aid dosage is set
too high. Reduce the dosage, see
"Before using for the first
time".
Frequently asked questions
54