MIDLAND 77-255ESP - Manual (Page 2)

2
Your 40 channel CB represents the state of the art in high tech engineering.
This unit is not only a full feature CB transceiver but incorporates a high
performance 10 channel NOAA weather bureau VHF receiver. The full 10-
channel weather receiver allows use on all current and future NOAA weather
bureau channels plus Canadian and international channels. The unit
incorporates microprocessor controlled PLL circuitry for precise tuning and
increased function. Receiver noise and interference can now be largely
eliminated by the new ESP2™ noise reduction system. Also included is a
backlighted Liquid Crystal Display (LCD) digital information center that out-
dates CB’s with LED readouts.
How to install your
Midland mobile CB
This transceiver may be installed in any 12 volt negative ground-
system car or truck. Almost all current U.S. and foreign vehicles use a
negative system, but some older models and some newer large trucks may
have a positive ground.
Check the requirements for your vehicle before you begin
installation.
Generally, you have a negative-ground system if the minus ( - )
battery terminal is connected to the motor block. Contact your dealer in the
event you are unable to determine your vehicle’s polarity system.
Installation and operating accessories furnished with your
Midland CB :
1. Easy removal mounting bracket system.
2. Microphone bracket system.
3. All main-unit and microphone mounting hardware needed for normal
installation.
4. Plug-in microphone with coil cord.
5. FCC part 95, Subpart D.
6. Owner’s Manual.