Musical Fidelity X-AS100 - Manual (Page 8)

Instructions For Use. Page 8
X-AS100
TROUBLESHOOTING
If none of these actions effect a cure, please contact your dealer, or an authorised Musical
Fidelity service agent. Remember, never open the case of the X-AS100 yourself, as this will
invalidate the guarantee.
Basic troubleshooting of an amplifier is similar to troubleshooting of any other
electrical or electronic equipment. Always check the most obvious possible causes
first. To give you a few ideas of what to look for, check the following:
Problem Probable Cause Remedy
No power when POWER
is pressed Mains plug not inserted
correctly Plug in securely
PSU unit not connected
to main unit Plug PSU umbilical lead
into back of main
X-AS100 unit
No sound Volume control is set
to minimum on Preamplifier Turn up the volume
Mute is selected on
Preamplifier Press mute button on
remote control
Preamplifier not connected
to Power amplifier Check phono cable
connection between units
Speakers are not connected,
or are connected incorrectly Check speaker cables
Sound is not precise,
lacking in bass and
stereo image Speakers are connected
out of phase Make sure that both
speakers are connected
correctly