Multitech MULTIMODEMII MT5600BAV.90 - Manual (Page 28)

Chapter 3 - Using the Front Panel
28
MT5600BA/BL Series User Guide
Caller ID Options
Press the
à and Enter buttons to enable formatted (FCID) or unformatted (UCID)
Caller ID, or to disable Caller ID altogether. Same as the #CID=0, #CID=1, and
#CID=2
commands.
Note: Because Caller ID information is sent between the first and second ring, regis-
ter S0 must be set to 2 or more rings for the modem to receive Caller ID information.