Miele CS1411 - Manual (Page 27)

Cut-out
^ Make the countertop cut-out for the
desired number of appliances.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be
heat-resistant.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
3 /
16
" (4 mm), can
be carefully filed down to fit.
Installation
27