Moxa Technologies UPORT 1110 - Manual (Page 20)

UPort 1110 and 1130 User’s Manual Installation and Configuration
2-13
Configuring the Adaptor
If you need to change the COM number that the adaptor assigns to the COM port, or adjust other
advanced settings, you may go to Device Manager and right-click the UPort adaptor, which will be
listed under Multi-port serial adaptors. In the context menu that pops up, you may select
Properties in order to modify the COM port settings.
In the Port Configuration tab, you will see the new COM port listed. Click Port Setting to
modify the COM number and other parameters.