beautypg.com

Introduction, Safety measures, Positioning the appliance – Melissa 645-098 User Manual

Page 14: Cord, plug and mains socket, Key to main components of the appliance

background image

1

INTRODUCTION

To get the best out of your new appliance,
please read this user guide carefully before
using it for the first time. Take particular note of
the safety precautions. We also recommend that
you keep the instructions for future reference, so
that you can remind yourself of the functions of
your appliance.

SAFETY MEASURES

Normal use of the appliance
• Incorrect use of this appliance may

cause personal injury and damage to the
appliance.

• Use for its intended purpose only. The

manufacturer is not responsible for any
injury or damage resulting from incorrect use
or handling (see also Guarantee Terms).

• For connection to 230 V, 50 Hz only.
• The kettle may only be used with the base

station supplied.

• For domestic use only. Not for outdoor or

commercial use.

• Remove the plug from the socket once you

have finished using the appliance.

• Please note that the appliance will remain

hot for a while after you switch it off. Always
allow it to cool completely before you put it
away or clean it.

• Do not submerge in water or any other

liquid.

• Do not switch the appliance on unless there

is water in it.

• Water level must always be between "MIN"

and "MAX". Check water level using the
internal water level indicator.

• Never leave unattended when in use, and

keep an eye on children.

• Avoid touching the outside of the kettle

when in use, as it becomes hot. Touch the
handle and lid only. Be careful of hot steam
when opening the lid.

• Never touch the appliance or base station if

your hands are wet or damp.

Positioning the appliance

• Always place the appliance on a level, dry,

stable and heat-resistant surface.

• Always place the appliance at the back of

a kitchen counter and at a safe distance
from flammable objects such as curtains,
tablecloths or similar.

• The appliance must not be placed or stored

near other sources of heat.

• Do not cover.

Cord, plug and mains socket

• Check regularly that neither the cord nor

plug is damaged and do not use if there is
any damage, or if it has been dropped on
the floor, dropped in water or damaged in
any other way.

• If the appliance or plug is damaged, it must

be inspected and if necessary, repaired by
an authorised repair engineer, otherwise
there is a risk of electric shock. Never try to
repair the appliance yourself.

• Remove the plug from the socket when

cleaning, or when the device is not in use.
Avoid pulling the cord when removing the
plug from the socket. Instead, hold the plug.

• Do not allow the cord to hang over the edge

of a table/counter, and keep it away from hot
objects and naked flames.

• Check that it is not possible to pull or trip

over the cord or any extension cord.

• Do not wind the cord around the appliance.
• Check the cord in the base fits into one of

the small incisions in the edge to ensure the
base station is stable, and not standing on
the wire.

KEY TO MAIN COMPONENTS OF
THE APPLIANCE

1. Incision for cord
2. Stud
3. Lid
4. Opening button
5. Indicator light
6. On/Off button
7. Handle
8. Spout
9. Power cord with plug
10. Base

UK