Miele DA 398-5 - Manual (Page 16)

Changing the light bulb
,WARNING
TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Before changing the light bulbs,
disconnect the hood from the power
supply, see "Important Safety
Instructions".
When in use halogen bulbs become
extremely hot, use caution. Do not
attempt to change the bulbs until
they have had sufficient time to cool.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease its life.
Follow the bulb manufacturer’s
instructions.
^ Remove the grease filters.
^ Turn the knurled screw
counterclockwise. The halogen lamp
will swivel down.
^ Turn the bulb counterclockwise and
pull it out of its socket.
Use the same bulb type as a
replacement: GU/GZ10, 120V, 50W.
^ Replace the bulb with a new one in
the reverse order.
^ Replace the grease filters.
Cleaning and Care
16