Connections features – MidiLand S4 3050M User Manual

Page 4

CONNECTIONS

FEATURES

44444

With the power switch in the off position and the AC adapter plug not connected, refer to the instructions and

illustrations below.

Using the supplied RCA

RCA

RCA speaker cable

speaker cable

speaker cable connect the left and right satellite speakers to the subwoofer amplifier’s

output

output. The connection terminals are simple plug-in type, needing only to be concerned with connecting the Left
output to the Left speaker and vice-versa. Refer to illustration I-1

illustration I-1

illustration I-1.

In the package please locate a 4’ stereo 3.5mm plug audio cable

audio cable

audio cable. This cable is intended to connect a computer’s

sound card, a portable CD player, or wherever a source with a 3.5mm jack is required to the amplifier’s inputs.
Using the 4’ cable, simply plug one end into the source’s output jack

source’s output jack

source’s output jack and connect the other end into the

amplifier’s input

input

input. Refer to illustration I-1.

illustration I-1.

Power is supplied to the S4 MidiLand™ 3050

S4 MidiLand™ 3050

via a supplied external AC adapter

AC adapter

AC adapter. The correct voltage adapter

is supplied for the territory you purchased the unit in. First, make sure the on/off LED located on the subwoofer’s
front panel, is not “ILLUMINATED”. Second, connect the coaxial power plug into the labeled power receptacle on
the rear of the subwoofer. Third, connect the country specific corded plug into an approved and properly function-
ing AC wall outlet. DO NOT

DO NOT

DO NOT use an extension cord or an overly crowded wall plate.

•

50 WATT RMS INTEGRATED POWER AMPLIFIER

6½” (165mm) SUBWOOFER

2½” (65mm) WIDEBAND SATELLITE SPEAKERS

COMPLETE MAGNETIC/VIDEO SHIELDING

EXTERNAL LOW-NOISE AC ADAPTER

DNAMIC SOUND QUALITY

WALL MOUNT CAPABILITY