MITSUBISHI ELECTRIC DIAMOND VIEW 1998E - Manual (Page 13)

9
Unbalance adjusts the pincushion balance if both sides of the
image are bowed toward either the left or the
right.
Trapezoid makes the vertical edges of the image parallel.
Parallelogram aligns the top and bottom edges of the image.
Top corner adjusts the edge curvature at the top corners of
the image.
Bottom corner adjusts the edge curvature at the bottom corners
of the image.
3. Colour Adjustment
Colour mode Colour Temperature
(Preset Mode)
Colour Temperature
(User Mode)
C1 (9300K) 9300K User Mode 1
C2 (6500K) 6500K User Mode 2
Preset Colour Mode: In this mode, C1 and C2 are two memory areas where
the factory-preset colour settings are stored. These settings are fixed and
can not be modified.
User Colour Mode: Press or to locate the colour mode and Enter to
choose a colour. Press or again to make the adjustment. If you want
to reset to preset modes, please locate to recall the preset colour
settings