Philips Magnavox CCA191AT - Manual (Page 47)

Sleep Timer 47
Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
Press the SLEEP button. The sleep timer display will appear on
the screen. (You can not set the sleep timer during a recording.)
1-2
• Finish all recordings before the
TV/VCR shuts itself off. If a record-
ing is in progress, the sleep timer
will be cancelled.
• A timer recording will not begin
unless the TV/VCR power is off.
Two minutes before a timer record-
ing starts, PLEASE TURN OFF FOR
TIMER RECORDING flashes on the
screen. If you see this message, turn
off the TV/VCR.
• If the power fails, you might lose
the sleep timer setting.
Helpful Hints
SLEEP 10 SEC
GOOD NIGHT
SLEEP 0 MIN
2
Within five seconds, press the SLEEP button repeatedly
to select 30 minutes, 60 minutes, 90 minutes, or 120 min-
utes. In a few seconds, the display will disappear. Then the
TV/VCR will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
● To see how much time remains until the TV/VCR shuts itself
off, press the SLEEP button once. The time remaining will
appear on the screen briefly. You cannot do this during a
recording.
● To cancel a sleep timer setting, press the SLEEP button until 0
MIN appears on the screen. The on-screen display will disap-
pear in a few seconds. You cannot cancel the sleep timer during
a recording.
VOL.
CH.
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
TRACKING REC/OTR
SPEED MEMORY
ALT. CH
PAUSE/STILL
MUTE
F.FWD REW
PLAY
STOP
SLEEP
MENU CLEAR