Makita 4340CT - Manual (Page 13)

13
Anti-splintering device
For splinter-free cuts, the anti-splintering device can be used. To install the
anti-splintering device, move the tool base all the way forward and fit it from the
back of tool base. When you use the cover plate, install the anti-splintering
device onto the cover plate.
CAUTION:
• The anti-splintering device cannot be used when making bevel cuts.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspec-
tion and replacement, any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
1. Base
2. Anti-splintering device
1
2
001929
• Jig saw blades
• Hex wrench 4
• Rip fence (guide rule) set
• Guide rail adapter set
• Guide rail set
• Anti-splintering device
• Dust nozzle
• Cover plate
• Hose (For vacuum cleaner)