Magic Chef MCO2212ARW - Manual (Page 16)

15
AUTO START
Auto start can be programmed for up to two cooking stages.
Auto start can not be programmed for auto defrost.
1. Program the desired power
level and cooking time for
food to be cooked.’
2. Touch CLOCK/A.START pad.
3. Enter the desired start time by
touching number pads.
4. Touch START pad.
The AUTO START indicator appears and
":0" is displayed.
The display will show you what you touched.
The present time & the cooking program
indicator appear in the display and the
AUTO START indicator & colon start
blinking. When the selected start time arrive,
the oven light turns on and the oven begins
operating. The AUTO START indicator
disappears and the next stage indicator
begins to blink. When the cooking is
completed, you will hear 3 beeps. The oven
light turns off and the present time appears
in the display.
NOTE: AUTO START can be used for time cooking, if the clock is set. If the oven door is opened
after programming AUTO START, it is necessary to touch the START pad for the time of
day to appear in the readout so that the oven will automatically begin programmed cooking
at the chosen AUTO START time.
Before setting, check to make sure the clock is showing the correct time of day.
CLOCK/
A.START
START
CHECKING AUTO START TIME
Once AUTO START has correctly been programmed, the present time will appear on the display.
1. Touch CLOCK/A.START pad. The programmed AUTO START time will
appear on the display for 3 seconds.
QUICK START
QUICK START allows you to reheat for 30 seconds at 100% (full power) by simply touching the
QUICK START pad.
By repeatedly touching the QUICK START pad, you can also extend reheating time to 5 minutes by
30 seconds.
1. Touch QUICK START pad. “ :30” is displayed and the oven starts
reheating after 1.5 seconds.
CLOCK/
A.START
QUICK
START