Motorola SD7550 - Manual (Page 19)

9
SD7504
U
ser Guide
9
Registering Your New Camera
Before you can use your new wireless camera, you must register it to your base
unit. SD7500 Series base units allow you to register up to 12 devices (e.g.,
handsets, cameras, cell docks), and use up to four devices at one time.
To register a new camera:
1. Ensure that your camera is plugged into an electrical outlet.
2. Press and hold the
PAGE button on the camera. Release the button after
approximately four seconds or until the LED turns red and flashes quickly.
3. Press and hold the base unit’s PAGE button. Release the button after
approximately four seconds, or until the base unit’s IN USE LED flashes.
When the registration is complete, the camera’s LED is solid green.