Musical Fidelity M6PRX - Manual (Page 10)

Issue 2 Page 10 of 11
SPECIFICATIONS
Output
Power 260 Watts per channel into 8 Ohms (24 dBW)
Voltage 46 Volts RMS, 20Hz to 20 kHz; onset of clipping
(130 Volts peak-to-peak)
Current peak-to-peak 140 Amps
Damping factor 210
Output devices 4 pairs per channel
Line input
THD+N <0.007% typical, 20 Hz to 20 kHz
Signal / noise ratio >120 dB ‘A’-weighted
Input impedance 50k Ohms
Frequency response +0, –1dB, 10Hz to 100 kHz
Connections
Line level inputs 1 pair line level XLR (balanced) connectors
2 pairs line level RCA connectors
Line level outputs 1 pair line level RCA connectors
Speaker outputs 4 pairs 4mm banana plug/binding posts
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption 750 Watts maximum
Weight
Unit only, unboxed 19.7 kg (43⅓ lbs)
In shipping carton 24.4 kg (53⅔ lbs)
Dimensions
Wide 440 mm (17⅓ ”)
High, including feet 125 mm (5 ”)
Deep (front to back) including terminals 390 mm (15⅓ ”)
Standard accessories
IEC type mains lead (10-Amp type)
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.