Minuteman UPS UPS - Manual (Page 7)

6
English
REAR PANEL
1
5
2
3 6
7
9
INSTALLATION PLACEMENT
8
4
1. The RJ-45/RJ-11 modular connectors are used for 10 Base-T network/single
line telephone surge protection. (see section 3)
2. The communications port is for UPS monitoring and control. (see section 4)
3. The output receptacles are NEMA 5-15R type.
4. Rating/Serial number label.
5. The Smart Slot is for MINUTEMAN option cards.
6. The output circuit breakers will trip in the event the individual banks of the
output receptacles exceed the rating of the circuit breaker (Not on all models).
7. The input power cord has a NEMA 5-15P or 5-20P (S 2000) connector.
8. The input circuit breaker will trip in the event the load exceeds the UPS's
power rating.
9. The DIP Switch setting may be changed by the user to set the desired
inverter (on battery) output voltage. (see section 4)