Miele F 456 i-3 - Manual (Page 43)

^ Securing the appliance door to the
furniture door:
– Secure bracket
a to the appliance
door by screwing hexagon-headed
screw
b through the pre-drilled
holes in the appliance door.
– Check that the two metal edges
c
are flush (see symbol II ).
– Drill fixing holes
d, and screw in the
short 4 x 14 mm chip board screws
e.
– Align depth "Z" on the furniture door:
Loosen screws
f at the top of the
appliance door, and loosen the
hexagon-headed screw
g at the
bottom of the fixing bracket. By
moving the furniture door, create a
gap of 2 mm between the furniture
door and the front edge of the niche.
Close the door and align it with
neighbouring furniture doors.
(On large or divided doors, attach a
second pair of fixing brackets
a in the
handle region of the door. Use the pre-
drilled holes in the appliance door).
^ Place all covers in position.
Building in the appliance
43