Morphy Richards FP48952MEE - Manual (Page 3)

Unpacking your hand
blender
WARNING: Carefully unpack
your hand blender, blades are
very sharp.
Wash all parts before first use, see
cleaning instructions page 6.
Assembling the
attachments
Insert by pushing the blending leg,
whisk gearbox or the chopping
bowl lid into the blender body, until
it clicks into place.
To remove the attachment press the
release button.
Using the hand blender
WARNING: Make sure that the
hand blender is switched off
and unplugged from the mains.
1 Clean the blending attachment
before using it for the first time with
a damp cloth.
2 Insert the blending leg into the main
housing and click into place
A.
3 The hand blender can now be
plugged in and is ready to use.
WARNING: Do not blend in the
chopping bowl or damage will
occur to the product. Use the
plastic measuring beaker.
4 Place the blending leg into the food
to blend, select the required speed
for your food on the speed control,
then press the on/off button
B.
Release the on/off to stop blending.
5 After use, unplug the blender and
remove the blending leg by pressing
the release button and pull gently
away.
6 Give the blending leg a rinse with
cold water. If the main body has
been splashed just give it a wipe
with a damp cloth.
WARNING: Your hand blender is
designed for intermittent use.
Do not use non-stop for more
than 1 minute. Allow to cool
down for a minimum of 5
minutes before further use.
Using the chopper
attachment
The chopper attachment can be
used for meat, hard cheese, nuts,
herbs, boiled eggs, dry bread etc.
WARNING: Blades are very
sharp.
1 Place the chopping bowl onto the
chopping bowl base. This will
prevent the jug from slipping
C.
2 Fit the chopping blade into the
chopping bowl
D.
3 Add food to be chopped.
4 Place the chopping lid on top,
making sure that it is correctly fitted
on the chopping blade
E.
5 Place the blender body onto the top
of the chopping bowl lid until it has
clicked into place.
6 Plug the blender into the mains
socket and press the on/off switch,
holding the blender and jug firmly
on the work surface.
Note: Your hand blender is not
suitable for grinding coffee beans.
When chopping meat ensure that all
the bones have been removed,
before adding to the bowl.
Using for Ice crushing
The blender leg is fitted with a
special blade suitable for crushing
ice. It can be used to crush ice
cubes to produce fine ice for
cocktails, cold drinks etc.
1 Place a maximum of 4 ice cubes in
the plastic measuring beaker.
2 Press firmly down on the ice cubes
with the blender using a plunging
action until the ice cubes are fine
ice pieces.
4 5 www.morphyrichards.com www.morphyrichards.com
g
Features
⁄ Blender leg
¤ Release button
‹ Blender body
› Turbo switch
fi On/off switch
fl 8 Speed control
‡ Whisk gearbox
· Whisk attachment
‚ Chopping bowl base
(also storage bowl lid)
„ Chopping bowl
‰ Chopping bowl operating lid
 Chopper blade
Ê Wall mounting bracket
Á Wall mounting screw and
wall plug x2
Ë Plastic Measuring beaker with
storage lid
¤
‹
›
‡
·
‚
„
В
К
fi
⁄
fl
Б
Л
‰
A
1
2
8
3
4 5
6
7
B
C
D
E
Your hand blender is designed to help you prepare
everything from soups to chocolate mousse, crush
ice quickly and chop a variety of food with minimal
effort.
The hand blender can be used with the measuring
beaker or a saucepan.
FP48952MEE-Rev1 26/4/06 4:17 pm Page 4