Miele 05 620 661 - Manual (Page 15)

5. Level the legs
^ The rear leveling legs can be ad-
justed with a T20 Torx screwdriver by
turning the screws at the front of the
slide skis.
To raise the machine turn clockwise.
To lower the machine turn counter
clockwise.
Several turns may be needed to set the
correct height. Do not use a power
screwdriver.
^ Adjust the front leveling legs by
pushing on the feet with a slotted
screwdriver.
^ Tipping the machine slightly back-
wards, if posssible will make adjust-
ing the front legs easier. Make sure
the machine is level when adjust-
ments are complete.
The dishwasher should be raised
until it just touches the underside of
the countertop.
Installation
15