Miele DA 402 - Manual (Page 25)

a 3 protective shields to prevent
scratches to the chimney during
installation.
b 2 hose clips for securing the
ducting.
c 1 reducing collar for use with 5"
(125 mm) exhaust ducting.
d Telescopic retaining plate
secures the chimney extension
Caution: During the installation
process, please be careful of sharp
edges.
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the
motor assembly.
2 screws 3.9 x 7.5 mm for securing the
chimney.
1 allen wrench
for adjusting the unit height
1 lever for dismantling the chimney
Installation instruction sheet
Installation accessories
25