Memorex MP3823 - Manual (Page 9)

8
NOTES:
•
Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 19 tracks).
• As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search +
or – button.
• The CD player will stop after all programmed tracks have been played or the STOP (■) button is
pressed. If the STOP (■) button was pressed, the programmed tracks will remain in memory. Simply
press the PROGRAM button and then the PLAY/PAUSE (❿/ ) button to continue Program playback.
• To cancel Program playback, press the PROGRAM button to enter the Program mode and then press
the STOP (■) button, or open the CD door.
• When 19 tracks have been programmed, the CD memory is full (“- -” will appear in the display).
TO PROGRAM THE MEMORY (UP TO 19 TRACKS)
Rotate the FUNCTION control to
the CD position. Insert a CD as
described in the TO INSERT A
CD section on page 5.
1
Use the SKIP/Search – ❶ or
+ ❷ button to select the first
track to be programmed.
2 1
3
Press the PROGRAM button, the
PROGRAM indicator will blink.
2
Press the PROGRAM button
again; the selected track has now
been programmed and counted as
program 1.
4
Press the PLAY/ PAUSE (❿/ )
button to begin playback; the
PROGRAM indicator will light and
the tracks will play in the order
programmed.
6
Repeat steps 3 and 4 to program
the other desired tracks in
sequence (up to 19 tracks).
5
COMPACT DISC (CD) OPERATION (CONTINUED)
MP3823 O/M.QXD 4/30/02 10:57 AM Page 8