Miele G 1262 - Manual (Page 15)

Rinse aid indicator
When the rinse aid indicator first comes
on, there will be enough rinse aid left
for 2 - 3 washes.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
If the "Tab" function is selected, the
rinse aid indicator will not light, see
"Additional options - Tab".
Adjusting the dosage
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 0 to 6.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "o".
^ Press and hold the program button
and at the same time turn the
dishwasher on with "
g". Hold the
program button until the lower right
program indicator lights.
If it does not come on, start over.
^ Press the "Options" button 3 times.
The "Tab" indicator flashes 3 times.
The time display shows "
p 3" flashing.
A rinse aid amount of 3 ml is selected
(factory setting).
The set value is shown in the time
display after "
p".
^ Select the desired setting with the
program button. Every touch of the
button adjusts the level.
The dosage is saved.
^ Turn the dishwasher off "o".
Before using for the first time
15