McIntosh XRT30 - Manual (Page 19)

19
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as re-
ceived. Failure to do so will result in shipping damage.
Use the original shipping carton and interior parts only
if they are in good serviceable condition. If a shipping car-
ton or any of the interior part(s) are needed, please call or
write Customer Service Department of McIntosh Labora-
tory.
Note: The High Frequency Column Base is wrapped in bubble
pack and placed in a small carton.
Packing Instructions
High Frequency Section Column
Quantity
Part Number Description
1 034203 Top shipping carton
1 034204 Bottom shipping carton
2 034205 Foam end cap
2 034206 Foam center cap
Bass Section
Quantity
Part Number Description
2 034218 Top or bottom shipping carton
2 034217 U-Shaped shipping carton
2 034220 Foam end cap
Note: The Foam End Cap, when
used for the bottom of the
XRT30 Bass Section, has
three foam knockouts
which must be removed to
accommodate the sides
and front of the cabinet
bottom.