Miele G843SCVI - Manual (Page 36)

What if … Possible fault Fix
after a program has
ended, the optic indica-
tor and the program in-
dicators flash? There may be a technical
fault. – Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicators flash
again after the next pro-
gram cycle, call the Miele
Technical Service Depart-
ment.
there is a knocking
noise in the wash cabi-
net? The spray arm is hitting
an item in the basket. Interrupt the program, re-
arrange items blocking
the spray arms.
there is a rattling noise? Items are not secure in
the wash cabinet. Interrupt the program and
rearrange loose pieces.
there is a knocking
noise in the water
pipes? This may be caused by
the installation or the di-
ameter of pipe. This has no effect on the
dishwasher. If in doubt
contact a plumber.
dishes are not dry,
glasses and cutlery are
spotted? The rinse aid setting may
be too low, or the rinse aid
reservoir is empty. Increase the dosage or
refill the reservoir, see "Be-
fore using for the first
time".
Dishes were taken out too
soon. Leave dishes in longer.
Frequently asked questions
36