Indicator and warning lamps, Adjustments – Mini COOPER User Manual

Page 17

OVERVIEW

REPAIRS

OPERATION

CONTROLS

DATA

INDEX

INDICATOR AND WARNING LAMPS

Technology
that monitors itself

The system runs a check on the warning
and indicator lamps marked by "

●

" each

time you switch on the ignition. They each
light up once for different periods of time.

If a malfunction should occur in one of
these systems, the corresponding lamp
does not go out after the engine is started
or it lights up while the vehicle is moving.
You will see how to react correctly to this
below.

Red: stop immediately

Battery charge current

●

The battery is no longer being
charged. Indicates a defective alter-

nator drive belt or a problem with the
charge circuit. Please contact the nearest
MINI center.
If this lamp lights up, the power-assist for
steering can be deactivated.

If the drive belt is defective, do not
continue driving. The engine could be

damaged due to overheating. When the
power-assist is deactivated, increased
steering effort is required.

Engine oil pressure

●

Stop immediately. Switch off
engine. Check the engine oil and

top up as required. Please contact the
nearest MINI center.

Do not continue driving, otherwise,
the engine could be damaged

because of inadequate lubrication.

Brake warning lamp

●

If the lamp comes on when the
parking brake is not engaged:

Check the brake fluid level. Before driving
further, be sure to comply with the infor-
mation on pages 79, 57 and 92.

Brake warning lamp for Canadian
models.

With navigation system option:

Coolant temperature warning
lamp in the speedometer

●

If the lamp comes on while oper-

ating the vehicle, the engine has over-
heated. Switch off the engine immediately
and allow to cool down, see also page 56.