2 connecting battery and installing exhaust pipe, 3 engine prestart checks – Miller Electric Metro 250D User Manual

Page 22

OM-402

4.2

Connecting Battery and Installing Exhaust Pipe

ST-801 079-A / Ref. ST-175 918-C

7/16, 1/2 in

−

Y Connect negative (−)

cable last.

Tools Needed:

Y Stop engine.

Installation of exhaust pipe is
optional.

4.3

Engine Prestart Checks

Ref. ST-159 219-D

Check all fluids daily. Unit must be

cold and on a level surface. Oil may

be added at either oil fill.
Engine stops if oil pressure is low.
Y Heavy loading during first 50

hours will damage engine.

Keep load less than 225A

(weld) or 7 kVA (power) for

first 50 hours.

Exhaust Pipe

If unburned fuel and oil collect in ex-

haust pipe during run-in, see Sec-

tion 9.

Full

Diesel

Full