Specifications for lcd4000 – NEC LCD4000 User Manual
Page 36
![background image](/manuals/121440/36/background.png)
English-34
Specifications for LCD4000
Product Specifications
Analog Input
Digital Input
LCD Module
(40" / 101.6cm diagonal)
Pixel Pitch:
0.681mm
Resolution:
1280 x 768 dots (WXGA)
Colour:
16,777,216
Brightness:
450cd/m
2
(Typ.)
Viewing Angle:
Up 85°/ Down 85°/ Left 85°/ Right 85° (typ) @ CR>10
External speaker out put inpedance
Rating 7W x 7W (8Ohm)
Frequency
Horizontal:
31.5kHz - 75.0kHz (15.75/15.625kHz)
31.5kHz - 48.4kHz
Vertical:
58.0 - 62.0 Hz
58.0 - 62.0 Hz
Pixel Clock
25.0MHz - 162.0MHz
25.0MHz - 65.0MHz
Viewable Size
871.68 x 523.008mm
Input Signal
PC-Input:
Signal Drive:
Separated Direct Drive
TMDS
Video:
Analog RGB 0.7V p-p
Input Impedance 75Ohm
Composite: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg. (video 0.7Vp-p Pos.)
Sync:
Separate: TTL level (Pos./Neg.) Input Impedance 2,2KOhm
Input-terminal:
BNC(R,G,B,H,V)
DVI-D (Digital)
Mini D-sub 15pin
VIDEO-Input:
Composite 1.0V p-p Input Impedance 75Ohm BNC and RCA-INPUT
Y/C Y:0.7V p-p C:0.283V p-p Input Impedance 75Ohm S-TERMINAL-INPUT
Component 1.0/0.7V p-p Input Impedance 75Ohm BNC-INPUT
AUDIO-Input:
Two RCA JACK L/R INPUT, STEREO Mini Jack INPUT
Control-Input:
Mini D-sub 9Pin (RS-232C)
Resolutions Supported
640 x 480 at 60 Hz
800 x 600 at 60 Hz
1024 x 768 at 60 Hz
1280 x 768 at 60 Hz.................................... Recommended Resolution
1280 x 1024 at 60 Hz.................................. Analog input only
1600 x 1200 at 60 Hz.................................. Analog input only
Power Supply
2.35A @ 100-120 V, 1.05A @ 220-240V
Operational
Temperature:
5 - 40°C
Environment
Humidity:
20 - 80% (non-condensing)
Storage
Temperature:
-20 - 60°C
Environment
Humidity:
10 - 90% (non-condensing): 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension
Net:
949 (W) x 605(H) x 141 (D) mm (without Stand),
949 (W) x 643.9 (H) x 311 (D) mm (with Stand)
Gross:
1125 (W) x 770 (H) x 261 (D) mm
Weight
Net:
Approximately 27.5kg
Gross:
Approximately 33.5kg
VESA compatible arm
2 x 200 mm x 200 mm (6 Hole)
mounting interface
3 x 200 mm x 200 mm (8 Hole)
Complied Regulatory and
UL60950/CSA C22.2 No.60950/ TUV-GS/EN60950/
Guidelines
FCC-B/DOC-B/EN55022-A/EN55024/EN61000-3-2/EN61000-3-3/CE
Power Management
VESA DPMS
Plug & Play
VESA, DDC CI
Accessories
User’s manual x 1, Power Cord x 1, PC - Video Signal Cable x 1, Remote Control x 1,
AA Battery x 2, Clamper x 2, Screw x 2, CD-ROM, Ferrite Core x 4, Band x 3,
Stand for the Independence x 2, Screw (M5 x 40) for stand x 4
NOTE:
Technical specifications are subject to change without notice.