beautypg.com

Morphy Richards contemporary User Manual

Page 4

background image

4

4 After the set time has been reached

the bread will pop-up automatically
ready for removal from the slots. The
bread carriage lever will have returned
to its upper position and the heating
element will have switched
off.

If the bread in your toaster becomes
jammed disconnect your toaster at
the socket, allow it to cool, then
remove the bread.

When not in use, switch your toaster
off at the mains and remove the plug
from the socket. DO NOT WRAP THE
CABLE AROUND THE MAIN BODY
OF THE APPLIANCE DURING OR
AFTER USE.

Using your re-heat button

Using your re-heat button

Using your re-heat button

Using your re-heat button

Using your re-heat button

If your toast has popped up and gone

cold, the toaster offers a re-heat facility.
To use, depress the bread carriage lever
and press the re-heat button immediately

. The button will illuminate and the

toaster will operate for a short period,
re-heating the bread.

Using the cancel setting

Using the cancel setting

Using the cancel setting

Using the cancel setting

Using the cancel setting

If you wish to interrupt the toasting

process, press the cancel button .

Using the frozen bread button

Using the frozen bread button

Using the frozen bread button

Using the frozen bread button

Using the frozen bread button

To toast frozen bread, do not adjust the

browning control, place the bread
normally in the bread slots, depress the
bread carriage lever and press the frozen
bread button . The button will illuminate
and the toaster will automatically toast for
an extended period.

2 / 4 slice selection switch

2 / 4 slice selection switch

2 / 4 slice selection switch

2 / 4 slice selection switch

2 / 4 slice selection switch

2

4

On the four slice model there is the

option to turn-off the heating elements in
two of the bread slots when only two
slices of toast are required.

Switch this switch between the 2 slice

and 4 slice setting. When the toaster is in
the 2-slice setting only the two left-hand
bread slots will toast.

Using the bun warmer

Using the bun warmer

Using the bun warmer

Using the bun warmer

Using the bun warmer

Clip the bun rack (for 4 slice clip the

bun racks) onto the slots on top of the
toaster, ensuring it is securely placed. Set
the browning control to between 1 and 3.
Depress the bread carriage lever until it
holds down. Wait for the toaster to switch
off automatically or press the cancel
button to switch
the toaster off
before remov-
ing the buns.
Take care not
to touch the
metal bun
rack as this
will be hot.

Additional points

Additional points

Additional points

Additional points

Additional points

• In order to achieve uniform browning,

we recommend you wait a minimum of
30 seconds between each toasting, so
that the control can automatically be
reset.

• If toasting one slice only, you may

need to adjust the browning control to
a slightly lower setting.