Marantz PD4298HD s - Manual (Page 19)

9
ENGLISH
When the indicating lamp blinks in green or the message
“POWER SAVE” or “OUT OF FREQUENCY” appears on the
screen, there is something unusual about the status of reception.
See “Symptoms That Seemingly Appear to be Failures.”
OPERATING INSTRUCTIONS
Turning Power On and Off
●
To turn on the main unit power supply, main unit the MAIN POWER switch ( ) of the main
unit to ON and then press the SUB POWER button or the POWER ON or POWER SOURCE
ON/OFF button of the remote controller.
●
To turn off the main unit power supply, press the SUB POWER button of the main unit or the
POWER OFF or POWER SOURCE ON/OFF button of the remote controller, then main unit
the MAIN POWER switch ( ) to OFF.
■
For normal operations, leave the MAIN POWER switch ( ) main unit to ON and use the SUB
POWER button or the POWER ON or POWER SOURCE ON/OFF button of the remote controller
to turn the power on and off.
Indicating lamp Power status
Off Off
Lights red
Off
(standby)
TIPS
■ Avoid repeatedly turning the monitor on and off at short time intervals.
●
Failures might result from such operation.
■ Turn off the main power switch ( ) before leaving the monitor out of
use for an extended period of time.
■ If a power failure occurs while the main unit is running, it would be
powered on upon recovery from the failure. Turn off the unit main power
switch before leaving the main unit.
Main power
switch
Main unit Remote
controller
SUB-POWER POWER
ON ON/OFF OFF
SOURCE
22
Operating
When the MAIN POWER switch is
set to OFF.
When the MAIN POWER switch is
set to ON and POWER OFF or
POWER SOURCE ON/OFF button of
the remote controller or the SUB
POWER button on the main unit
located at the front part of the bottom
plate is off.
Lights or blinks
green
On
When the MAIN POWER switch is
set to ON and POWER ON or POWER
SOURCE ON/OFF button of the
remote controller or the sub power
button on the main unit located at the
front part of the bottom plate is on.