Maintenance and care, Resetting the filter change indicator – Miele S 500 - S 548 User Manual

Page 36

Replacing the "ACTIVE air
clean" filter and the "ACTIVE
HEPA" filter

^ Open the dust compartment lid.
^ Release the catch and remove the

filter.

^ Insert the new filter so that it engages

at the back, then close the catch.

^ Close the dust compartment lid firmly

until it clicks into place.

Resetting the filter change
indicator

The filter change indicator (Reset
button

7) must be reset each time the

filter is replaced. To do this, the vacuum
cleaner must be plugged in.

^ Press the filter change indicator light

until it goes out. The display is now
reset.

Maintenance and care