MACKIE TT24 User Manual
Page 7

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
7
Factory Global All Routing Presets
Factory Input Routing Presets
Factory Output Routing Presets
Preset
Description
Default
Default input, output, and U-Net routing
Snake A Analog
DS3232 connected to a U100 in card slot A, routed to the Analog bank
Snake A Digital
DS3232 connected to a U100 in card slot A, routed to the Digital bank
Snake B Analog
DS3232 connected to a U100 in card slot B, routed to the Analog bank
Snake B Digital
DS3232 connected to a U100 in card slot B, routed to the Digital bank
MON Snake LP48
DS3232 connected to a U100 in card slot B, routed to the Analog bank
and to FOH via a second U100 in card slot A. Aux sends are routed
back to the snake. Confi gure console as MON Master on setup>linking
screen.
FOH Snake LP48
FOH console linked to MON via a U100 in card slot A. DS3232 is routed
to the Analog bank through the monitor console. An LP48 in card slot
B is routed back to the snake along with Main and Group outputs.
Confi gure console as FOH Master on setup>linking screen.
Preset
Description
Default
Default input routing
ADAT B1 Mic B2
ADAT inputs routed to Analog bank and Mic inputs routed to Digital
bank
Mic B1 B2
Mic inputs routed to Analog and Digital banks for independant control
of FOH and monitor mixes from a single console
ADAT B1 B2
ADAT inputs routed to Analog and Digital banks for independant
control of FOH and monitor mixes from a single console
Preset
Description
Default
Default output routing. Group outputs 1-8 to rear panel Group/Matrix
outputs.
Default Matrix
Default output routing. Matrix outputs A-H to rear panel Group/Matrix
outputs.
Default LP48 A
Default output routing. LP48 in card slot A, speaker processor outputs
1-8 to rear panel Group/Matrix outputs.
Default LP48 B
Default output routing. LP48 in card slot B, speaker processor outputs
1-8 to rear panel Group/Matrix outputs.
Pre DSP ADAT Out
ADAT outputs routed from the Pre DSP channel signal
ADAT In to Out
ADAT inputs routed directly to the ADAT outputs for recording
Aux on Group XLR
Aux 1-8 routed to the rear panel Group/Matrix XLR outputs for easy
connection to an analog snake