Memorex MB2054 - Manual (Page 8)

7
Make sure VOX switch on rear of
unit is set to OFF. Turn the unit
on, and select the desired sound
quality as described on page 5.
1
Select a File Folder by pressing
the FILE button (see page 6).
VOX
SPLP 2
NORMAL RECORDING
Press the REC/STOP button and
the REC indicator will light and
the elapsed time will appear.
Speak into the built-in
microphone or insert a
microphone into the MIC jack and
speak into it in a normal tone of
voice. Press the REC/STOP
button again to stop recording.
A B C
VOX
SPLP
3
While recording, press the
PLAY/STOP button ❶ to see the
remaining time available. To
pause, press the PAUSE/MODE
button ❷; PAUSE will blink in the
display. To release pause, press
the PAUSE/MODE button again.
2
1
4
OPERATION
This unit is capable of recording only when sound is heard. To use this
feature, see the next page. For normal recording, follow steps below.
NOTES:
•
The built-in audio level automatically sets the recoding level.
• To record another message, simply repeat step 3, the message
number will increase by one.
• For normal voice levels, a distance of 5-9 inches is appropriate.
MB2054 O/M.QXD 8/12/02 11:16 AM Page 7