Memorex DT1900-C - Manual (Page 7)

7
ENGLISH
Direct Channel Selection buttons (0-9)
Press these buttons to select a channel. The channel
number will appear on the upper right corner of the TV
screen. If an invalid channel number is selected, the display
will revert to the original channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option is in the TV position, all
channels can be instantly selected by using two buttons.
(For example, to select channel 2, press “0”, then “2”. If you
press only “2”, channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in
order.
TV - VHF/UHF channels
CABLE - CABLE TV channels
TV OPERATION
CABLE TV Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
CH. 1-9
CH. 10-12
CH. 13-99
CH. 100-125
Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002”.
Press “0”, then remaining 2 digits.
Example, to select channel 12, press
“012”.
Press the 2 digits in order.
Example, to select channel 36, press
“36”.
Press the 3 digits in order.
Example, to select channel 120, press
“120”.
1
2
3
4 (CHANNEL) and buttons
Press and release the (CHANNEL) or
button. The channel automatically stops at the next
channel set into memory. Press and hold the button
down to change channels more quickly.
For proper operation, before selecting channels,
they should be set into the TV's memory.
See “TO MEMORIZE CHANNELS”.
SETTING LANGUAGE
This TV can display the on-screen language in English, Spanish or French.
Select the language you prefer first, then proceed with the other menu options.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.
1
2
3
4
Press the MENU button.
Press the or button
to select “LANGUAGE”, then
press the button.
Press the MENU button to return to normal TV viewing.
NOTE: If the station being viewed stops broadcasting, the
TV will automatically shut off after 15 minutes.
To turn on the TV, press the POWER button.
The VOLUME can be adjusted to a desired level by
pressing the
(VOLUME) + or – button.
The sound level will be indicated on the TV screen by
the character.
Set the TV/CABLE menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CABLE setting. See “TO MEMORIZE
CHANNELS”.
Press the or button
to select the desired language:
English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS).
3R70131A-E/P02-07 8/3/04, 9:26 7