Mercedes-Benz 2005 E 320 - Manual (Page 171)

170
Controls in detail
Control system
Lighting submenu
Access the Lighting submenu via the Set-
tings menu. Use the Lighting submenu
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the
æ or ç button to the Light-
ing submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Lamp circuit headlamp .
The selection marker is on the current
setting.
̈ Press æ or ç to select manual or
daytime running lamp ( constant )
mode. This function is not available in
countries where daytime running
lamps are mandatory.
With daytime running lamp mode activated
and the exterior lamp switch at
position
M or U the low beam head-
lamps are switched on when the engine is
running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
For more information on the daytime run-
ning lamp mode, see “Lighting”
(
୴ page 141).
Function Page
Set daytime running lamp mode
(USA only) 170
Set locator lighting 171
Ambient light level 173
Exterior lamps delayed shut-off 172
Interior lighting delayed shut-off 173