Miele KM82-2 - Manual (Page 21)

Installation instructions
Place the provided seal
f
under the
edge of the cooktop.
b Appliance
c Tensioning screw
d Clamp
e Countertop
f Seal
Turn the tensioning screws
c
counter clockwise until a resistance
is felt, then turn the clamps to the left.
Place the appliance in position, turn
the clamps and tighten the tension-
ing screw until the clamps press into
the countertop
e .
Connect the appliance to the electri-
cal supply.
When installing several Combiset units,
a stainless steel spacer bar must be
placed between the units. It is supplied
with its own installation instructions.
loosen tighten
Installation instructions
21