Maxtor DVMR User Manual
Page 13
12
6) VCR, VIDEO PRINTER
7) Other External Device
Connect VCR or VIDEO Printer to VCR out on the rear panel of DVR.
RS-232C : Control DVR through RS-232C port by using PC.
RS-485 : Control external device like PTZ Camera
RELAY Output : Relay Output
SENSOR Input : SENSOR Input (Alarm connection)
ETHERNET : Connection to LAN, WAN, Internet.
VGA : Connection to a VGA monitor(CRT,TFT LCD) if optional VGA board is fixed
on the main board as shown in the following figure.
Resolution set by manufacturer is 800x600 60 Hz, and user can set resolution
in MONITOR SETUP / VGA SETUP / VGA RESOLUTION.
CHAP. 3 Installation