Miele KM 344 KM 342 - Manual (Page 18)

Cleaning the burners
The burners can be dismantled and
cleaned when cold.
^ Remove the burner parts and wash
them in a solution of hot water and
liquid dish soap. Dry them thor-
oughly. Make sure that the flame
holes are clean and completely dry.
^ Wipe the burner base clean with a
damp cloth and then dry.
^ Gently wipe the ignitor and ignition
safety control with a well wrung cloth,
and then wipe dry.
Make sure that no liquid gets into the
appliance.
Reassemble the normal / fast burners
as follows:
^ Place the burner cap, a, onto the
burner base,
b, so that the notches
fit into the holes (see arrows).
Cleaning and care
18
a
b