Motorola DDN 7496A ML850 - Manual (Page 2)

Need Help Finding A Vehicle Base? Refer to the vehicle base reference guide on pages 6 & 7.
Cradle & Dock
ing S
ta
t
ions
37
Item No. Placement Weight Height Width Depth
NP-ADPTR-M
Between the DS-CLEVIS, 0-90 CLEVIS, OR QUAD-MOTION TS3
(see pg. 23 for more details on Motion Attachments ) and
Motorola Docking Stations (DDN 7508A, DDN 7496A, DDN 7496
SU, DDN 7506A, DDN 7502A, DDN 7501A or DDN 7501A SU)
0.6 lbs. 0.75" 5.0" 3.0"
Motorola Docking Station Interface Plate
Features
- Heavy gauge steel construction for long-term durability
- Black powder coat fi nish for maximum corrosion resistance
Item No. Weight Height Width Depth
DDN 7508A 7.2 lbs. 2.0" 11.0" 10.75"
Motorola ML850 Low Tier
Features
- Simple latching action: - Push in front handle to secure the latching brackets into the computer
- Pull out the handle to release the latches
- Locating pins for assured computer placement
- Rounded edges to enhance personal safety
- Key lock use is optional and not necessary
- 3 year limited warranty
- Must use the
Motorola Interface Plate (NP-ADPTR-M) to attach to any Motion Attachment
- Heavy gauge steel construction for long-term durability
- Black powdercoat fi nish for maximum corrosion resistance
Item No. Description
Radio
Frequency
Weight Height Width Depth
DDN 7496A Front handle is curved down NA 10.5 lbs. 4.5" 11.75" 10.75"
DDN 7496A SU
Front handle is curved up
Note: DDN 7496A SU should be used if there could
be interference with dock’s ability to open smoothly
NA 10.5 lbs. 4.5" 11.75" 10.75"
Motorola ML850 Standard Tier
Features
- Designed using MIL-STD-810F test procedures
- Internal/protected circuit board and power supply protect against dirt and dust
- Simple latching action:
- Push in front handle to insert the docking connector and secure the latching brackets into the computer
- Pull out the handle to release the latches and disengage the docking connector
- Locating pins for assured computer placement
- Floating docking connector for reliable docking connection
- Recessed backward facing ports allow for dock to be mounted up to the dash
- Loops and slots provided for strain relief of all cables
- Rounded edges to enhance personal safety
- 1 year limited warranty (printed circuit board and docking connector)
- 3 year limited warranty (on all sheet metal components)
- Must use the
Motorola Interface Plate (NP-ADPTR-M) to attach to any Motion Attachment
- Heavy gauge steel construction for long-term durability
- Black powdercoat fi nish for maximum corrosion resistance
Port Replicator
- Serial (2)
D-sub 9 pin
- Parallel (1) D-sub 25 pin
- USB (2)
- External video
D-sub 15 pin
- Auxiliary
Internal Power Supply
- Operating Temperature: -25° C to 60° C (-13° F to 140° F)
- Input Voltage: 12V DC - 19V DC
- Output Voltage: 19V DC
- Output Amp: 4.7A
- Reverse Voltage Protection
- Under Voltage Protection: 11.4 cutout - Over Voltage Protection
- LED Power Indicator Light: Green LED - Input fused
- Docked Indicator Light: Amber LED - Output current limit
Motorola Cradles & Docking Stations
Item No. Placement Misc. Weight Height Width Depth
7110-0885
Positioned between any Motion
Attachments and Motorola ML900
Docking Station (Item No. DDN 7501B)
Computer and mount/dock
combined weight should
not exceed 30lbs.
0.6 lbs. 0.75" 5.0" 3.0"
Motorola Docking Station Shock Isolator Plate
Features
- Highly recommended for rugged or harsh environments
- Protects equipment from shock and vibration wear
- Black powder coat fi nish for maximum corrosion resistance
D
H
W
Shown:
DDN 7496A
D
H
W
D
H
W
D
H
W