Miele W 1113 - Manual (Page 32)

Changing the light bulb
A burnt out light bulb will not affect the
performance of the washer.
^ Remove the tool from behind the
detergent dispenser drawer.
^ Turn the washer on and open the
door.
^ Disconnect the power supply to the
work area by unplugging the unit,
tripping the circuit breaker or
removing the fuse.
^ Insert the tool into the slit of the light
bulb, then turn counterclockwise until
resistance is felt.
^ Pull out the drum lighting.
A replacement blub can be obtained by
contacting Miele.
^ Insert the light bulb into the socket.
Shift it back and forth until the bulb
falls into place, then turn clockwise
with the tool.
A fault will appear and the washer
will not function if the light bulb is not
inserted correctly.
If this occurs reinsert the light bulb.
Washer care
28