Miele DA 188 - Manual (Page 23)

Securing the appliance to
neighbouring wall units or fitting side
panels
^ Remove the vapour canopy.
^ With grease filters removed, secure
the range hood, or fit the side panels,
using two screws per side.
For the lower screws, first remove the
screw caps, and replace them
afterwards.
^ Replace the vapour canopy.
^ For air extraction mode:
– Fit flexible ducting or a extraction
pipe to the discharge connection,
using a hose clamp.
– Now fit the other discharge air
connection.
(see "Air extraction")
^ For recirculation mode:
– Fit the two deodorizing filters (see
"Cleaning and care").
^ Finally, replace the grease filters.
Installation
23