Memorex MVDP1102 - Manual (Page 28)

27
DVD OPERATION
Slide the POWER ON/OFF switch to the ON
position to turn the unit on; the POWER
indicator will light.
NOTE: To turn this unit off, simply slide the
POWER ON/OFF switch back to the
OFF position.
1
Slide the Open Door switch 1 to the right to
open the unit. Press the DISC
COMPARTMENT DOOR PUSH OPEN
button 2 to open the disc tray, “OPEN” will
appear on the screen. Insert a disc with the
label side facing up on the disc tray.
2
1
2
PLAYBACK OF A DVD
IMPORTANT NOTES:
• “ ” will appear on the screen during operation if you try to access a function that is not
available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will
appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position
it with the printed title side facing up, align it with the guides and place it in its proper
position.
• It is important that you read the manual that accompanies the DVD disc as there are
features that are on this DVD player that cannot be used with certain DVDs. There are also
extra features that are different for each DVD disc, so they are not explained in this owner’s
manual.
• If the unit is in the Stop mode, Pause mode or if there is no disc in the disc tray, the screen
saver will appear on the screen after three minutes.
• Make sure that the AV IN/OUT switch is in the OUT position. Otherwise, the display will not
show a picture.
CONTINUED ON THE NEXT PAGE