Memorex MP8800 - Manual (Page 9)

OPERATION
8
Press the POWER button to turn the
unit on.
1 1
1 1
1
Press the TUNER/BAND button to
select radio. Repeatedly press the
TUNER/BAND button to select AM or
FM. If a stereo station is broadcast,
“ST” will appear.
1 1
1 1
2
MANUAL TUNING: Repeatedly press
the Tune/Skip/Search
o 1 or n 2 but-
ton to manually advance the frequen-
cy in the display up or down until the
desired frequency appears.
1
2
1 1
3
AUTOMATIC TUNING: Press and hold the
Tune/Skip/Search
o 1 or n 2
button until
the frequency in the display starts to scan,
and then release the button; the tuner will
search and then stop on the next strong
station it finds. Repeat this step until the
desired frequency appears in the display.
1
2
1 1
4
Adjust the VOLUME buttons 1 and
EQ button 2 as desired. Repeatedly
press the EQ button 2 to cycle
through the EQ settings as follows:
ROCK, JAZZ, POP, CLASSICAL.
1 2
2 1
5
To turn the radio off, press the
POWER button again.
1 1
1 1
6
LISTENING TO THE RADIO
ANTENNAS
AM–This unit has a built-in ferrite rod antenna, which provides adequate reception in most
areas. If reception is weak, turn the unit to improve reception.
FM–The FM Antenna is for FM reception only. If reception is weak, adjust the length and the
angle of the antenna.