Miele S 5980 - Manual (Page 28)

When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead and the upholstery nozzle
can be replaced.
Check them from time to time and
replace them if the pile has worn down.
To replace the thread lifters
^ Use a knife or similar object to
remove them from the slots.
^ Fit new thread lifters.
If threads or hair have wound round
the bearing on the floorhead roller:
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove.
c Take out the roller.
Remove any threads and hair, replace
the roller and refit the bearing.
Spare parts are available from your
Miele dealer or from the Miele Spare
Parts Department (see back cover for
contact details).
Maintenance and care
28