Memorex MPD8845 User Manual
Page 16
NOTES ON PROGRAM PLAYBACK
• You can review the program by pressing the PROG. button repeatedly
while in the Stop mode.
• To add a track to the program memory, simply press the PROG.
button, and the display will show the next available memory number,
then continue as per the steps on the previous page.
• Press the STOP (■) /POWER OFF button to stop the program before
it is finished (the program memory will be kept).
• Each file may be stored in the program memory as many times as
desired (up to 24 files).
• You can scroll through the program while it is playing using the
Skip/TUNING DN or
UP button.
15
CD OPERATION (CONTINUED)
ESP (ELECTRONIC SKIP PROTECTION)
This feature protects against loss of sound caused by vibrations and
shocks. Continuous playback is ensured once some of the music has
been stored into memory.
ESP will automatically be activated when listening to standard or MP3
CDs. You cannot deactivate ESP while listening to an MP3 CD. However,
you can deactivate it when playing a standard CD by simply pressing the
MENU/ESP/BAND button; the ESP indicator will disappear from the
display. Deactivating the ESP will conserve battery life.
RESUME
This unit has Auto resume, which will resume playback of the previous
track when the unit is turned on (and the same CD is still in the CD
compartment).
The RESUME button will allow you to resume playback of a CD that was
previously stopped. If you stopped a CD in the middle of playing, simply
press the RESUME button and the CD will continue at the start of the last
played track location where the CD was stopped.
MPD8845.O/M.QXD 6/25/02 11:55 AM Page 15