Miele WT 945 S WPS - Manual (Page 11)

Important control panel
features
Programme selector
The programme selector is used to set
the
– basic wash programmes and
temperatures
and
– the drying programmes and
temperatures.
Additional option buttons
Additional options can be added to the
basic programme. Pressing the relevant
button selects or de-selects the
particular option. An additional option is
selected if its indicator lamp is on.
If the lamp does not come on, the
function is not compatible with the
programme you are trying to use it with.
The indicator lamp will go out when the
option button is released.
"Spin" button with indicator lamps
To change the spin speed press the
"Spin" button.
It is not possible to select a spin speed
higher than the permitted maximum
spin for the basic wash programme.
The indicator lamps show the setting
selected.
Spinning at 400 - 1500 rpm
The spin can be set within this range for
the
– final spin during a wash programme
or
– for "Thermospin" during drying (see
"DRYING - Programme selection" for
information on the "Thermospin").
The final spin in a wash programme
can also be deactivated:
^ Press the "Spin" button until you
reach
"Rinse hold"
The laundry is not spun and remains
suspended in the final rinse water. This
reduces creasing if the laundry is not
going to be removed from the drum im-
mediately after the end of the
programme.
To continue the programme:
– with a final spin
press the "Spin" button until you
reach the spin speed you want.
– without a final spin
Press the "Spin" button repeatedly
until the
Without final spin indicator
lamp lights up.
Without final spin
The laundry is not spun after the final
rinse but the water is drained away and
the machine goes straight into the
anti-crease stage.
Description of the appliance
11