Miele OPTIMA SERIES G 2420 - Manual (Page 35)

Default setting
All settings can be reset to the factory
default.
^ Turn the dishwasher off "s".
^ Press the "Start/Stop" button and at
the same time turn the dishwasher on
s. Hold the "Start/Stop" button at
least 4 seconds until the "Start/Stop"
indicator comes on.
If it does not come on, start over.
^ Press the "Delay Start" button
12 times.
The "Delay Start" indicator flashes once
long and twice short in intervals. The
time display shows
p 0 or p 1.
The time display shows if a setting was
changed.
– " p 1": All settings are factory default.
– " p 0": At least one setting was
changed.
^ To reset the dishwasher to the factory
default, press the program button.
The setting is now saved.
^ Turn the dishwasher off s.
Additional functions
35