Miele DA 6290 W - Manual (Page 13)

Glass edge lighting
]
^ Press the button for the glass edge
lighting
] to have the glass edge lit
from behind. It can be turned on and
off independently of the fan and
overhead lighting.
Changing the color of the
glass edge lighting
£
The color of the glass edge lighting can
be changed as desired.
White is the preset color.
^ Turn on the glass edge lighting ].
^ Six factory-set colors can be called
up by pressing the color change
button
£ repeatedly:
a White
b Green
c Red
d Blue
e Rapid color sequence
The light color changes continuously.
All colors are cycled through once
every minute. Initially, the button
indicator flashes rapidly.
f Slow color sequence
Operates the same above, but the
colors rotate once every 15 minutes.
Initially, the button indicator flashes
slowly.
A selected light color can be saved.
To select the color:
^ Select the rapid or slow color
sequence (color setting
e or f).
The continuous color changes start.
^ When the desired color is reached,
press and hold the color change
button
£ until the glass edge
lighting flashes three times.
This light color is now saved as an
additional color setting
g.
^ It can be selected at any time until a
new color is saved in the same way.
^ To turn it off, press the button for the
glass edge lighting
]. The lighting
turns off after a short delay.
The next time you turn it on, the last
active color setting
a to g is selected.
Automatic Safety Shut-Off
The fan will turn automatically off 10
hours of use. The lighting however will
remain on.
^ Press the On/Off button K to turn the
fan back on again.
Operation
13