Mercedes-Benz 2003 G 55 AMG - Manual (Page 129)

129
Controls in detail
Control system
After entering the vehicle, the steering
wheel will move into the position stored in
memory when
ț the driver’s door is closed
ț you put the key in the starter switch
and
ț press the appropriate stored position
button on the memory switch
(
୴ page 99)
̈ Move the selection marker with
the æ or ç button to the
CONVE-
NIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
EASY-ENTRY FEATURE ACTIVATE .
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/exit feature
Setting key dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each key (
୴ page 97).
̈ Move the selection marker with
the æ or ç button to the
CONVE-
NIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT .
The selection marker is on the current
setting.
̈ Press æ or ç to set key depen-
dency to
ON or OFF .
i
To cancel steering wheel movement,
do one of the following:
ț move the steering column stalk
(
୴ page 22)
ț press the memory switch
(
୴ page 98)
OFF The easy-entry/exit
feature is deactivat-
ed
STEERING COLUMN The easy-entry/exit
feature is activated