Miele KM5947 - Manual (Page 39)

... One of the following has occurred:
– The Booster has automatically
de-activated ahead of time.
– The power level set will be reduced.
– The cooking zone is not working in
the usual way with the power level
set.
The overheat protection has been
triggered (see the section on "Overheat
protection").
... With the Auto heat-up function
switched on, the food in the pan
does not cook.
This may be because:
– There is too much food in the pan.
– The cookware does not conduct heat
well.
Select a higher continued cooking
setting next time, or start cooking at the
highest setting and then switch down
manually to a lower setting later on.
... The cooling fan continues to run
after switch-off.
That is not a malfunction. The fan runs
until the appliance is cooled down, and
then switches off automatically.
... An
F appears in the rear cooking
zone displays, and an
E in the front,
and numbers appear in the timer
display.
FE99:
The overheat protection mechanism in
the induction coil has been triggered.
As soon as the cooking zone has
cooled down sufficiently, you can
operate it as usual.
Other error messages: Interrupt the
power supply to the cooktop for
approximately 1 minute.
If the problem persists after power is
restored, please call customer service.
Troubleshooting
39